| Edge
Preparation Guidelines
for BZN Compacts Tool Blanks and Inserts
Note: For most roughing operations and all interrupted cuts, a chamfer
plus 0.025 mm hone is recommended.
Important
for the use of all BZN Compacts products
- Use rigid machining system with sufficient power
- Use largest radius possible to maximize tool strength
- Use negative rake tools and largest lead angles whenever possible
- Minimize insert overhang
- Use chamfered edge to minimize chippage on interrupted cuts
- Do not overuse cutting edge or stop machine in cut as insert breakage may
occur
- Do not use coolant on interrupted cuts
top |
